Labels

I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Monday, September 26, 2016

LADY DEATH



Supplies needed:

I am using the stunning artwork from Ismael Rac for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Miz Brainstorm called "Lady Death" which you can get by going here

Mask 11 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 26, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 11 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete, select none

Move paper layer below the frame

Select Element 108 - resize by 75%

Paste and position in the center of the canvas

Move to the bottom below the frame

Select Element 22 - resize by 55%

Paste and position on the top right

Select Element 63 - resize by 25%

Image flip and paste on the top left

Select Bat Element (113) - resize by 25%

Paste and position on the top left

Select Element 71 - resize by 25%

Image mirror and paste on the bottom right

Select Element 77 - resize by 30%

Paste and position on the bottom left

Select Element 40 - resize by 25%

Paste and position on the bottom left

Select Element 80 - resize by 20%

Paste and position on the bottom left

Select Element 76 - resize by 30%

Paste and position on the bottom left

Select Element 41 - resize by 20%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 107 - resize by 15%

Paste and position on the bottom right

Select Element 52 - resize by 15%

Paste and position on the bottom

Select Element 105 - resize by 20%

Paste and position on the bottom

Select Element 33 - resize by 20%

Paste and position on the bottom

Select Element 56 - resize by 15%

Paste and position on the bottom

Select Element 15 - resize by 20%

Paste and position on the bottom

Select Element 111 - resize by 15%

Paste and position on the bottom

Select Element 104 - resize by 15%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 59 - resize by 25%

Paste and position in the center where desired

Select Element 14 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom left

Paste paper 15 on canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Duplicate 2x and merge together

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, September 25, 2016

DRAGONFLY



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Autumn Ninfa" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 24, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 87

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Overlay

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below the frame

Select Element 60 - resize by 80%

Paste and position in the center of the canvas

Drop the opacity down on the element to 60%

Select Element 81 - resize by 35%

Paste and position on the top

Select Element 4 - resize by 25%

Paste and position on the top of the frame

Select Element 76 - resize by 25%

Paste and position on the top where desired

Select Element 46 - resize by 40%

Paste and position on the right side

Select Element 78 - resize by 22%

Paste and position on the right side

Select Element 77 - resize by 20%

Paste and position on the right side

Select Element 29 - resize by 25%

Paste and position on the bottom right

Select Element 85 - resize by 20%

Paste and position on the bottom right

Select Element 8 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 84 - resize by 20%

Paste and position on the bottom

Select Element 25 - resize by 20%

Paste and position on the bottom below tube layer

Select Element 9 - resize by 20%

Paste and position on the bottom below tube layer

Select Element 7 - resize by 25%

Paste and position on the top left

Select Element 86 - resize by 20%

Paste and position on the left side

Select Element 44 - resize by 25%

Paste and position on the bottom left below tube layer

Select Element 36 - resize by 25%

Paste and position on the bottom below tube layer

Select Element 47 - resize by 15%

Paste and position on the bottom below tube layer

Select Element 67 - resize by 20%

Paste and position on the top left

Select Element 32 - resize by 25%

Paste and position in the center of the canvas where desired

Select Element 14 - resize by 40%

Paste and position on the bottom where desired

Paste paper 5 on canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, September 24, 2016

WINEBERRY




Supplies needed:

I am using the stunning artwork from DiHalim for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Wineberry" which you can get by going here

Mask 275 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 24, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 90%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Luminance (Legacy)

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below the frame

Select Element 53 - resize by 40%

Paste and position on the top right

Select Wordart 1 Element - resize by 45%

Paste and position on the top left

Select Element 36 - resize by 35%

Paste and position on the right side

Select Element 38 - resize by 40%

Paste and position on the bottom right

Select Element 43 - resize by 20%

Paste and position on the bottom right

Select Element 32 - resize by 40%

Paste and position on the left side

Select Element 51 - resize by 20%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 50 - resize by 25%

Paste and position on the bottom

Select Element 48 - resize by 30%

Paste and position on the bottom

Select Element 5 - resize by 30%

Paste and position on the bottom left

Select Element 46 - resize by 20%

Paste and position on the bottom left

Select Element 20 - resize by 30%

Paste and position on the bottom left

Select Element 26 - resize by 20%

Paste and position on the bottom left

Select Spary 2 Element - resize by 30%

Paste and position on the canvas where desired

Add new raster layer and flood-fill with color of choice

Apply Mask 275 or mask of choice

Merge group and move to the bottom layer

Effect, Texture Effect, Texture with the Wet Fall Leave texture on the following settings:

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, September 13, 2016

AUTUMN DAY




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Autumn Day" which you can get by going here

Fall Mask 2 from Abstract Halo Creations which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 13, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 72 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Hard Light

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below the frame

Select Element 12 - resize by 40%

Paste and position on the top left

Select Element 9 - resize by 30%

Paste and position on the top left

Select Element 24 - resize by 65%

Paste and position on the top right

Select Element 10 - resize by 40%

Paste and position on the bottom

Select Element 34 - resize by 30%

Paste and position on the bottom right

Select Element 33 - resize by 30%

Paste and position on the bottom right

Select Element 46 - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 39 - resize by 15%

Paste and position on the bottom right

Select Element 38 - resize by 20%

Paste and position on the bottom right below tube

Select Element 4 - resize by 20%

Paste and position on the bottom

Select Element 41 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 29 - resize by 15%

Paste and position on the bottom

Select Element 30 - resize by 30%

Paste and position on the bottom

Select Element 32 - resize by 40%

Paste and position on the bottom left

Select Element 36 - resize by 30%

Paste and position on the bottom left

Select Element 37 - resize by 30%

Paste and position on the bottom left

Select Element 1 - resize by 20%

Paste and position on the bottom left

Select Element 49 - resize by 25%

Paste and position on the left side

Select Element 40 - resize by 20%

Paste and position on the bottom

Select Element 52 - resize by 20%

Paste and position on the bottom

Select Element 57 - resize by 30%

Paste and position on the bottom

Add new raster layer and flood-fill with color of choice

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Monday, September 12, 2016

HARD ROCK HD



Supplies needed:

I am using the stunning artwork from Ismael Rac for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags called "XRock" which you can get by going here

Mask 19 from Splitz Designz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 12, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 9 - resize by 95%

Paste and position in the center of the canvas

Select Frame Element 7 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Luminance (Legacy) and drop opacity down to 55%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below the frame

Select Element 63 - resize by 45%

Paste and position on the left side

Select Element 42 - resize by 40%

Paste and position on the right side

Select Element 39 - resize by 55%

Paste and position on the bottom

Select Element 73 - resize by 30%

Paste and position on the bottom right

Select Element 76 - resize by 30%

Paste and position on the bottom

Select Element 33- resize by 20%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 15%

Paste and position on the bottom

Select Element 51 - resize by 15%

Paste and position on the bottom

Select Element 47 - resize by 15%

Paste and position on the bottom

Select Element 44 - resize by 15%

Paste and paste on the bottom

Select Element 16 - resize by 75%

Paste and position on the bottom left

Select Element 34 - resize by 20%

Paste and position on the bottom left

Select Element 69 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 6 - resize by 25%

Paste and position on the bottom left

Select Element 12 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 71 - resize by 18%

Paste and position on the bottom left

Select Element 15 - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom below tube layer

Select Element 61 - resize by 45%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 26 - resize by 65%

Paste and position on the canvas where desired

Paste paper 2 on canvas

Apply Mask 19 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, September 4, 2016

FASHION MODEL



Supplies needed:

I am using the stunning artwork from Mariel for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mariel Designs called "Fashion Model" which you can get by going here

Mask 222 from Vix which you can find here

Sparkle mask 2 which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 4, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 11 - resize by 95%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 13

Select invert, delete, select none

Move paper layer below the frame

Select Frame Element 5 - resize by 40%

Paste and position on the bottom right

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Paste close-up tube on paper layer and delete

Select none

Drop opacity on close-up to 70%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 11 - resize by 40%

Paste and position on the top right below frame layer

Select Element 126 - resize by 65%

Paste and position in the center of the canvas

Select Element 53 - resize by 40%

Paste and position on the bottom right

Select Element 44 - resize by 15%

Paste and position on the bottom right

Select Element 66-1 - resize by 18%

Paste and position on the bottom right

Select Element 21-1 - resize by 15%

Paste and position on the bottom right

Select Element 51-1 - resize by 25%

Paste and position on the bottom right

Select Element 98-1 - resize by 45%

Paste and position on the left side

Select Element 62-1 - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 15%

Paste and position on the bottom right

Select Element 119 - resize by 20%

Paste and position on the bottom right

Select Element 10 - resize by 12%

Paste and position on the bottom right

Select Element 56-1 - resize by 12%

Paste and paste on the bottom

Select Element 24-1 - resize by 20%

Paste and position on the bottom

Select Element 42 - resize by 12%

Paste and position on the bottom

Select Element 30-1 - resize by 25%

Paste and position on the bottom left

Select Element 57 - resize by 20%

Paste and position on the bottom left

Select Element 123 - resize by 40%

Paste and position on the left side

Select Element 88-1 - resize by 20%

Image Free Rotate by 15% and paste on the top left

Add new raster layer and flood-fill with color of choice

Apply Mask 222 or mask of choice

Merge group and move to the bottom layer

Add new raster layer and flood-fill with color of choice

Apply Mask Sparkle Mask 2

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

COOL SWAG BABE



Supplies needed:

I am using the stunning artwork from Selisan Al-Gaib for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "USA Swag" which you can get by going here

Mask 180 from Insatiable Dreams which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 4, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 78 - resize by 65%

Paste and position on the top right

Select Element 86 - resize by 75%

Paste and position in the center of the canvas

Select Frame Element 94 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each circle in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete

Paste close-up tube on the bottom left circle and delete

Select none

Drop close-up to Overlay

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 34 - resize by 65%

Paste and position on the left side below frame element

Select Element 36 - resize by 55%

Paste and position on the right side

Select Element 27 - resize by 45%

Paste and position on the bottom right

Select Element 58 - resize by 30%

Paste and position on the bottom right

Select Element 26 - resize by 30%

Paste and position on the bottom right

Select Element 15 - resize by 30%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 5 - resize by 40%

Paste and position on the bottom right

Select Element 38 - resize by 40%

Paste and position on the bottom

Select Element 9 - resize by 40%

Paste and position on the bottom right

Select Element 17 - resize by 25%

Paste and paste on the bottom right

Select Element 64 - resize by 30%

Paste and position on the bottom

Select Element 25 - resize by 30%

Paste and position on the bottom left

Select Element 45 - resize by 30%

Paste and position on the bottom left

Select Element 53 - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 67 - resize by 25%

Paste and position on the bottom left

Select Element 101 - resize by 80%

Paste and position on the top of the canvas where desired

Select Element 84 - resize by 30%

Image Free Rotate Left by 15% and paste on the left side

Paste paper 7 on canvas

Apply Mask 180 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, September 3, 2016

MISS LOVE




Supplies needed:

I am using the stunning artwork from Alehandra Vanhek which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Miss Love" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 3, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 9 - resize by 55%

Paste and position in the center of the canvas

Duplicate and merge down

Select Frame Element 26 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Paste Element 79 on the right side and delete

Paste close-up tube above Element 79 where desired and delete

Select none

Change close-up to Overlay

Apply dropshadow and merge down

Move paper layer below frame layer

Select Element 66 - resize by 50%

Paste and position on the top right

Select Element 16 - resize by 40%

Paste and position on the bottom right

Select Element 48 - resize by 40%

Paste and position on the bottom right

Image duplicate, mirror and flip

Select Element 78 - resize by 30%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 50 - resize by 25%

Paste and position on the bottom right

Select Element 69 - resize by 20%

Paste and position on the bottom right

Select Element 83 - resize by 25%

Paste and position on the bottom

Select Element 88 - resize by 25%

Paste and paste on the bottom

Select Element 15 - resize by 25%

Paste and position on the left side

Select Element 67 - resize by 25%

Paste and position on the bottom left

Select Element 17 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 89 - resize by 10%

Paste and position on the bottom left

Select Element 84 - resize by 55%

Paste and position on the bottom right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif