Labels

I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Monday, May 29, 2017

MEREDIN



Supplies needed:

I am using the stunning artwork from Satin Grin for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Meriden" which you can get by going here

Mask 5 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 29, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 75 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper layer below frame layer

Select Element 57 - resize by 75%

Paste and position in the center above the frame

Select Element 66 - resize by 20%

Paste and position on the top left below the frame

Select Element 68 - resize by 40%

Paste and position on the top left

Select Element 46 - resize by 20%

Image Free Rotate Left by 15% and paste on the top right

Select Element 51 - resize by 76%

Paste and position on the bottom center

Select Element 29 - resize by 40%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 30 - resize by 150%

Paste and position on the bottom left

Select Element 82 - resize by 20%

Paste and position on the bottom left above pillow element

Select Element 20 - resize by 20%

Paste and position on the bottom left

Select Element 10 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 7 - resize by 20%

Paste and position on the bottom right

Select Element 6 - resize by 25%

Paste and paste on the bottom right

Select Element 32 - resize by 15%

Paste and position on the bottom right

Select Element 98 - resize by 20%

Paste and position on the bottom right

Select Element 65 - resize by 30%

Paste and position on the bottom right

Paste paper 5 on the canvas

Apply Mask 5 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, May 28, 2017

WICKED THORN




Supplies needed:

I am using the stunning artwork from Enamorte for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Schnegge Scraps called "IB Enamorte 48-1" which you can get by going here

Mask 26 from Splitz Designz which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 28, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Element 7 - resize by 50%

Paste and position on the top left

Select Element 12 - resize by 30%

Paste and position on the top left

Select Element 18 - resize by 45%

Image Free Rotate Right by 15% and paste on the left side

Select Element 2 - resize by 50%

Paste and position on the bottom left

Select Element 9 - resize by 30%

Paste and position on the top right below the frame layer

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 11 - resize by 40%

Paste and position on the left side

Select Element 8 - resize by 40%

Paste and position on the bottom left

Select Element 5 - resize by 30%

Paste and position on the bottom left

Select Element 4 - resize by 40%

Paste and position on the bottom left

Select Element 3 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Wordart Element - resize by 50%

Paste and paste on the bottom

Apply Eyecandy Gradient Glow on fat default settings (glow width 3)

Paste paper 4 on the canvas

Apply Mask 26 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

MAGIC ALICE



Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Magic Alice" which you can get by going here

Plugins: Lokas 3D Shadow, Harry's Filters (optional), Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 28, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Mask Element 9 - resize by 75%

Paste and position in the center of the canvas

Select Element 8 - resize by 45%

Paste and position in the center of the canvas

Select your Freehand Selection tool and draw around the center of the element (Freehand (Replace), Feather 0, Range 10, Smoothing 0)

Paste paper 18

Select invert, delete, select none

Move paper layer below the element layer

Apply Harrys Filters (optional) with the following settings:

Select Element 40 - resize by 30%

Paste and position on the right side

Select Element 45 - resize by 20%

Paste and position on the bottom where desired

Select Element 32 - resize by 15%

Paste and position on the bottom right

Select Element 39 - resize by 15%

Paste and position on the left side

Select Element 37 - resize by 15%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 58 - resize by 25%

Paste and position on the bottom left

Select Element 82 - resize by 15%

Paste and position on the bottom left

Select Element 60 - resize by 20%

Paste and position on the bottom left

Select Element 73 - resize by 35%

Paste and position on the bottom left

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element 48 - resize by 15%

Paste and position on the bottom right

Select Element 33 - resize by 15%

Paste and paste on the bottom right

Select Element 19 - resize by 15%

Paste and position on the bottom right

Select Element 99 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 83 - resize by 12%

Paste and position on the bottom right

Select Element 6 - resize by 20%

Paste and position on the bottom

Select Element 42 - resize by 15%

Paste and position on the bottom

Select Element 51 - resize by 15%

Paste and position on the bottom

Select Element 26 - resize by 25%

Paste and position on the bottom

Select Element 105 - resize by 20%

Paste and position on the bottom

Select Element 52 - resize by 20%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

METAL BABE







These Extra's were made using the amazing artwork by Danny Lee and kit by Rieneke Designs called "I Love Metal ". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Saturday, May 27, 2017

ILLY SHANEE



Supplies needed:

I am using the stunning artwork from Selisan Al-Gaib for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Illy Shanee" which you can get by going here

Floral Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 27, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 55- resize by 103%

Paste and position in the center of the canvas

Select Element 45 - resize by 110%

Paste and position in the center of the canvas

Select Frame Element 68 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper layer below frame layer

Select Element 13 - resize by 50%

Paste and position on the top of the frame

Select Element 25 - resize by 50%

Paste and position on the right side

Select Element 62 - resize by 45%

Paste and position on the bottom

Select Element 60 - resize by 25%

Paste and position on the bottom

Select Element 19 - resize by 20%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 40%

Paste and position on the bottom left

Select Element 103 - resize by 15%

Paste and position on the bottom left

Select Element 61 - resize by 25%

Paste and position on the right side below the chair element

Select Element 70 - resize by 25%

Paste and position on the right side above chair element

Select Element 10 - resize by 20%

Paste and position on the bottom right

Select Element 83 - resize by 12%

Paste and paste on the bottom right

Select Element 14 - resize by 15%

Paste and position on the bottom right

Select Element 32 - resize by 15%

Paste and position on the bottom right

Select Element 104 - resize by 12%

Paste and position on the bottom

Select Element 22 - resize by 12%

Paste and postion on the bottom

Select Element 20 - resize by 25%

Paste and position on the bottom

Paste paper 2 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BEAUTY WATER




Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Beauty Water" which you can get by going here

Circle Mask 1 from Tonya which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 27, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 39 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Screen and drop opacity down to 60%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 67 - resize by 25%

Image Free Rotate Left by 15% and paste on the top of the frame

Erase and excess bits that go over the frame

Select Element 22 - resize by 25%

Paste and position on the bottom left

Select Element 27 - resize by 25%

Paste and position on the top right

Select Element 74 - resize by 35%

Paste and position on the bottom

Select Element 82 - resize by 35%

Paste and position on the bottom of the frame

Select Element 8 - resize by 45%

Paste and position on the bottom right

Select Element 98 - resize by 22%

Paste and position on the right side

Select Element 19 - resize by 25%

Paste and position on the bottom left

Select Element 32 - resize by 30%

Paste and position on the bottom right

Select Element 13 - resize by 30%

Imag mirror and paste on the bottom left

Select Element 76 - resize by 30%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 58 - resize by 25%

Paste and position on the right side

Select Element 69 - resize by 15%

Paste and position on the bottom right

Select Element 90 - resize by 12%

Paste and position on the bottom right

Select Element 33 - resize by 30%

Paste and position on the bottom right

Select Element 16 - resize by 15%

Paste and position on the bottom left

Select Element 24 - resize by 22%

Paste and paste on the bottom left

Select Element 11 - resize by 15%

Paste and position on the bottom left

Select Element 43 - resize by 15%

Paste and position on the bottom left

Select Element 46 - resize by 12%

Paste and position on the bottom

Select Element 9 - resize by 20%

Paste and position on the bottom

Add new raster layer and flood-fill with gradient of choice

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, May 26, 2017

DARK MERMAID



Supplies needed:

I am using the stunning artwork from Julia Fox for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Dark Mermaid Sea" which you can get by going here

Mask 12 from Babes Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 26, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 73 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper layer below frame layer

Select Element 56 - resize by 55%

Image Free Rotate Left by 15% and paste on the top of the frame

Select Element 22 - resize by 25%

Paste and position on the top center of the frame

Select Element 67 - Paste and position on the bottom

Select Element 47 - resize by 65%

Paste and position on the bottom right

Select Element 42 - resize by 40%

Paste and position on the bottom

Select Element 30 - resize by 25%

Paste and position on the bottom

Select Element 38 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 7 - resize by 35

Paste and position on the bottom right

Select Element 5 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 29 - resize by 25%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 20%

Paste and position on bottom right

Select Element 27 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 48 - resize by 20%

Paste and position on the bottom right

Select Element 62 - resize by 25%

Paste and position on the bottom right

Select Element 26 - resize by 30%

Paste and position on the right side

Select Element 55 - resize by 12%

Paste and paste on the bottom

Select Element 24 - resize by 25%

Paste and position on the bottom

Select Element 57 - resize by 12%

Paste and position on the bottom

Select Element 76 - resize by 85%

Paste and position on the canvas where desired

Paste paper 1 on the canvas

Apply Mask 12 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, May 21, 2017

STYLISH DIVA









These Extra's were made using the amazing artwork by Toriya and kit by Disturbed Scraps called "Always Stylish ". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

PINK MERMAID



Supplies needed:

I am using the stunning artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "Mermaid 6" which you can get by going here

Mask 21 from Gina Gems which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 21, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 37 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 22 - resize by 110%

Paste and position in the center below the frame

Select Element 28 - resize by 85%

Paste and position on the bottom

Select Element 48 - resize by 40%

Paste and position on the bottom left above the frame

Select Element 25 - resize by 85%

Paste and position on the bottom

Select Element 8 - resize by 30%

Paste and position on the bottom right

Select Element 38 - resize by 20%

Paste and position on the bottom right

Select Element 39 - resize by 25%

Paste and position on the bottom right

Select Element 16 - resize by 25%

Paste and position on the bottom left

Select Element 17 - resize by 40%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 41 - resize by 20%

Paste and position on the left side

Select Element 43 - resize by 15%

Paste and position on the bottom left

Select Element 45 - resize by 20%

Paste and position on the bottom left

Select Element 46 - resize by 15%

Paste and position on the bottom left

Select Element 19 - resize by 20%

Paste and position on the bottom right

Select Element 6 - resize by 20%

Paste and paste on the bottom

Select Element 2 - resize by 20%

Paste and position on the top left

Select Element 3 - resize by 15%

Paste and position on the top right

Select Element 10 - resize by 75%

Paste and position on the canvas where desired

Paste paper 8 on the canvas

Apply Mask 21 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SCHOOL DAYS




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "School Days" which you can get by going here

Mask 191 from Insatiable Dreams which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 21, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change closeup to Hard Light

Apply dropshadow and merge down on paper layer

Move paper layer below frame layer

Select WA2 Element - resize by 40%

Paste and position on the top right

Select Greenery 2 Element - resize by 30%

Paste and position on the right side of the frame

Select Splotz Element - resize by 40%

Paste and position on the top right

Select Books Element - resize by 35%

Paste and position on the bottom left

Select Bits2 Element - resize by 40%

Paste and position on the bottom right

Select Books 2 Element - resize by 35%

Paste and position on the bottom

Select Bag2 Element - resize by 40%

Paste and position on the bottom above the Books 2 element

Select Table Element - resize by 50%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Laptop Element - resize by 25%

Paste and position on right side above table element

Select Lipstick Element - resize by 30%

Paste and position on the top of the table element

Select Bits 3 Element - resize by 25%

Paste and position on top of the table element

Select Clips2 Element - resize by 40%

Paste and position on the bottom right

Select Flower 5 Element - resize by 30%

Paste and position on the bottom left

Select Pencils Element - resize by 25%

Paste and paste on the bottom left

Select Lock Element - resize by 35%

Image Free Rotate Left by 15% and paste on the bottom left

Select Lipbalm Element - resize by 30%

Paste and position on the bottom

Select Shoes Element - resize by 40%

Paste and position on the bottom

Select Glasses Element - resize by 30%

Paste and position on the bottom

Select Sparkles 5 Element - resize by 45%

Paste and position on the canvas where desired

Paste paper 3 on the canvas

Apply Mask 191 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, May 14, 2017

DAFFODIL FAIRY



Supplies needed:

I am using the stunning artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Daffodils" which you can get by going here

Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 14, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 27 - resize by 25%

Paste and position on the left side

Select your magic wand tool and select the center of the window (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Overlay

Apply dropshadow and merge down on paper layer

Move paper layer below window layer

Select Element 88 - resize by 45%

Paste and position on the right side

Select Element 8 - resize by 20%

Paste and position on the top left

Select Element 61 - resize by 18%

Paste and position on the top right

Select Element 49 - resize by 30%

Paste and position on the right side

Select Element 87 - resize by 35%

Paste and position on the bottom left

Select Element 53 - resize by 20%

Paste and position on the bottom left

Select Element 52 - resize by 20%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 9 - resize by 10%

Paste and position on the bottom right

Select Element 14 - resize by 15%

Paste and position on the bottom right

Select Element 33 - resize by 12%

Paste and position on the bottom right

Select Element 96 - resize by 12%

Paste and position on the bottom left

Select Element 98 - resize by 15%

Paste and position on the bottom left

Select Element 67 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 84 - resize by 18%

Paste and paste on the bottom

Select Element 24 - resize by 25%

Paste and position on the bottom

Select Element 72 - resize by 10%

Paste and position on the bottom

Select Element 92 - resize by 20%

Paste and position on the left side

Select Element 25 - resize by 15%

Paste and position on the bottom where desired

Paste paper 5 on the canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, May 13, 2017

ROCKIN ZOE








These Extra's were made using the amazing artwork by Alehandra Vanhek and kit by Reineke Designs called "Hat and High Heels ". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

ASIAN VINTAGE



Supplies needed:

I am using the stunning artwork from Chris Pastel for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Lil Mz Brainstorm called "Asian Vintage" which you can get by going here

Mask 26 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 13, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 99 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop opacity on tube down to 75%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 37 - resize by 30%

Paste and position on the top right

Select Element 23 - resize by 30%

Image Free Rotate Right by 15% and paste on the top left

Select Element 24 - resize by 40%

Paste and position on the bottom

Select Element 83 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 86 - resize by 15%

Paste and position on the bottom right

Select Element 94 - resize by 30%

Paste and position on the bottom right

Select Element 29 - resize by 30%

Paste and position on the bottom

Select Element 34 - resize by 30%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 78 - resize by 20%

Paste and position on the left side

Select Element 76 - resize by 40%

Paste and position on the bottom left

Select Element 9 - resize by 12%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 84 - resize by 20%

Paste and position on the bottom

Select Element 42 - resize by 20%

Paste and position on the bottom

Select Element 16 - resize by 15%

Paste and paste on the bottom

Select Element 50 - resize by 20%

Paste and position on the bottom

Select Element 102 - resize by 75%

Paste and position on the canvas where desired

Paste paper 6 on the canvas

Apply Mask 26 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, May 7, 2017

ROCKIN SEXY







These Extra's were made using the amazing artwork by Alehandra Vanhek and kit by Disturbed Scraps called "Rockin Sexy". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

CURVY FAIRY



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Lil Mz Brainstorm called "Fairy Curvy" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 7, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 42 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper layer below frame layer

Select Element 38 - resize by 75%

Paste and positon in the center of the canvas above frame

Select Eleent 18 - resize by 30%

Image mirror and paste on the bottom left below element 38

Select Element 123 - resize by 45%

Paste and position on the top

Select Element 81 - resize by 20%

Paste and position on top left

Select Element 41 - resize by 20%

Paste and position on the right side

Select Element 60 - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element - resize by 20%

Paste and position on the bottom left

Select Element 14 - resize by 20%

Paste and position on the bottom left

Select Element 40 - resize by 20%

Paste and position on the bottom right

Select Element 102 - resize by 20%

Paste and position on the bottom right

Select Element 9 - resize by 20%

Paste and position on the bottom

Select Element 50 - resize by 20%

Paste and paste on the bottom left

Select Element 79 - resize by 25%

Paste and position on the bottom left

Select Element 65 - resize by 30%

Paste and position on the bottom left

Select Element 66 - resize by 30%

Select Element 30 - resize by 20%

Paste and position on the bottom left

Paste and position on the bottom right

Select Element 5 - resize by 20%

Image mirror and paste on the bottom right

Select Element 84 - resize by 15%

Paste and position on the bottom

Select Element 63 - resize by 55%

Paste and position on the canvas where desired

Add new raster layer and flood-fill with color of choice

Apply Mask4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, May 1, 2017

EMILY



Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Emily 2" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 1, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 39 - resize by 60%

Paste and position in the center of the canvas

Select Frame Element 9

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete, select none

Move paper layer below frame layer

Select Element 119 - resize by 65%

Image Free Rotate Right by 15% and paste on the bottom right above the frame

Select Element 58 - resize by 35%

Paste and position on the top of the frame where desired

Select Element 82 - resize by 40%

Paste and position on the top right

Select Element 55 - resize by 12%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 42 - resize by 15%

Paste and position on the bottom left

Select Element 40 - resize by 25%

Paste and position on the bottom left

Select Element 25 - resize by 30%

Paste and position on the bottom left

Select Element 62 - resize by 20%

Paste and position on the bottom right

Select Element 15 - resize by 40%

Paste and position on the bottom right

Select Element 60 - resize by 12%

Paste and paste on the bottom right

Select Element 21 - resize by 20%

Paste and position on the bottom right

Select Element 1 - resize by 30%

Paste and position on the bottom right

Select Element 90 - resize by 20%

Paste and position on the bottom right

Select Element 28 - resize by 20%

Paste and position on the bottom

Select Element 6 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 115 - resize by 35%

Paste and position on the left side

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

STEAMPUNK MERMAID








These Extra's were made using the amazing artwork by Julia Fox and kit by Lil Mz Brainstorm called "Steampunk Mermaid". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif